Productfinder

Use the search or our filters to find the information that suits you.

    All filters

    Product

    45° Al Elbows 45° Cu Elbows 90° Al Elbows 90° Cu Elbows 90° Elbows with inner thread Abrasive mat Al Flare Nuts Al Tube Set Al Tubes Assembly Jaws type 50 Ball Valves with schrader valve Compact tube cutter Cordless Assembly Tool LOKPRESS EURO Flare-Fittings HOSELOK Hose-to-Tube Connectors Hand Assembly Tool MZ Hand Assembly Tool Set MZ for tube OD up to 12.7 mm (1/2") Hand Assembly Tool Set MZ-V for tube OD up to 12.7 mm (1/2") Hand Assembly Tool Set MZ-V for tube OD up to 35 mm (1 3/8") Hand Assembly Tool with two bendable handles MZ-V Headers Heat shrink sleeves Hose Hose cutter Hose set LOKBOX SK-VAC-01 LOKBOX TG-AUTO-500 LOKBOX TG-HVAC-1000 LOKBOX TG-HVAC-500 LOKCLIP Hose Connectors (Splicer) LOKCLIP Hose-to-LOKRING Connectors LOKCLIP Hose-to-Tube Connectors LOKCLIP Plastic Clip Holders LOKCLIP Stainless Steel Clips LOKPREP 65G LOKPREP HT LOKPREP LT LOKRING Al Stabilisation Inserts LOKRING Brass Connectors Type 50 with schrader valve LOKRING Brass Stabilisation Inserts LOKRING Brass T-Connectors Type 50 LOKRING Connectors with R134a low pressure port connection LOKRING RAC Starter Kit LOKRING Reducing Adaptors LOKRING Stoppers Type 50 LOKRING Straight Al Connectors Type 50 LOKRING Straight Al Reducing Connectors Type 50 LOKRING Straight Brass Connectors Type 50 LOKRING Straight Brass Reducing Connectors Type 50 LOKTOOL LC flex LOKTRACE KA-500 W21,8 LOKTRACER TLD.1000 LOKTRACER TLD.500 O-rings Parallel Branches (YP) Sandpaper Straight Fittings with inner thread Straight Fittings with outer thread (male insert) T-Branches (YT) Tube cutter Tube deburrer
    Clear selection
    My selection: Installation of HVAC systems Repair of Vehicle A/C systems Clear selection
    AM-SV
    • For cleaning tube ends without scratching
    • Suitable for all surfaces
    • Solvent-resistant
    • Dimensions: 158 mm x 224 mm
    • Highest quality from 3M
    GRATFIX N-E
    For quick and clean deburring of tubes, edges and steel plates.
    HC 6.12
    • For cutting refrigerant hoses.
    • Suitable for all common hose diameters in vehicle air conditioning systems.
    • Not suitable for foil hoses.
    HOSELOK Al
    • For assembling hose-to-tube connections.
    • Can be used with LOKRING aluminium connectors and reducing connectors.
    • Suitable for refrigerant hoses with…
    HSS NK
    • Protects connections against contact corrosion.
    • Must be used with all aluminium to copper tube connections.
    • High shrink ratio.
    • Available for tube outer…
    LOKBOX MZ-V MB 0835
    • LOKRING assembly tool for tube outer diameters from 6 to 35 mm (1/4" to 1 3/8").
    • Neatly organised in a handy case with rigid foam insert.
    LOKBOX SK-RAC-01
    For a perfect start in the world of quick, easy and, above all, low-cost repairs to air-conditioning systems.
    LOKBOX SK-VAC-01
    For a perfect start in the world of quick, easy and, above all, low-cost repairs to tubes and hoses in vehicle air conditioning systems.
    LOKBOX TG-AUTO-500
    • Complete kit for tracer gas leak detection in vehicle air conditioning systems in a robust plastic case.
    • Pressure reducer connection: W21,8-14 left…
    LOKBOX TG-HVAC-1000
    • Complete kit for trace gas leak detection in refrigeration and air conditioning systems, in a robust carry case.
    • Pressure reducer connection:…
    LOKBOX TG-HVAC-500
    • Complete kit for trace gas leak detection in refrigeration and air conditioning systems, in a robust carry case.
    • Pressure reducer connection:…
    LOKCLIP Al
    • For assembling hose-to-tube connections.
    • Can be used with LOKRING aluminium connectors and reducing connectors.
    • Plastic clip holder and two stainless…
    LOKCLIP Al NK
    • For assembling hose-to-tube connections.
    • Plastic clip holder and two stainless steel clips included. IMPORTANT: The LOKCLIP hose connections have…
    LOKCLIP GA LCS
    Two-metre length of hose in each of the four sizes: 06, 08, 10 and 12.
    LOKCLIP PCH
    Ensures the stainless steel clips of a LOKCLIP hose connection are in the right place.