LOKRING Brass Stabilisation InsertsLOKRING VH Ms

[Translate to English:]
  • For additional stabilisation of the LOKRING connection under mechanical loads.
  • Supports calibration of coiled tube.


IMPORTANT: Stabilisation inserts must not be used within an NRA adaptor or within the stainless steel tube of a EURO flare-fitting.

Technical Data

    • Max. operating pressure: 75 bar (1088 psi).
    • Admissible refrigerants: Suitable for all HFCs and mixtures, all HCs, R32 and CO2 (up to 75 bar). Not suitable for NH3.
    • Temperature range: -50 °C up to 150 °C (-58 °F up to 302 °F).
    • Tube diameter range: 6 to 41.3 mm (1/4" to 1 5/8").
    • Minimum tube wall thickness: 0.7 mm.

    Application

    • Installation of HVAC systems

    Equipment

    LOKTOOL LOKPRESS

    • Special hydraulic valve for quick and safe assembling of LOKRING Connections of type 50.
    • Diameters: 6 to 41.3…
    go to product

    LOKTOOL MZ-V

    • Specially developed for the LOKRING assembly
    • Patented lever mechanism for assembly with minimum effort
    • Assembly…
    go to product

    LOKRING NK Ms 50

    For connecting copper and/or steel tubes with identical tube outer diameters.

    go to product

    LOKPREP LT

    • Specially developed for use with LOKRING brass connectors.
    • Can be used in ambient temperatures up to 30°C…
    go to product

    LOKPREP HT

    • Specially developed for use with LOKRING brass connectors in high ambient temperatures.
    • Can be used in ambient…
    go to product

    GRATFIX N-E

    For quick and clean deburring of tubes, edges and steel plates.

    go to product

    AM-SV

    • For cleaning tube ends without scratching
    • Suitable for all surfaces
    • Solvent-resistant
    • Dimensions: 158 mm x 224…
    go to product